Thermal Disinfector HD 450 Basic PRO The thermal disinfector without hollow body preparation for dermatology, gynaecology, podology, proctology and surgery
The Thermal disinfector HD 450 Basic PRO is a washer-disinfector built according to DIN EN ISO 15883-1/2.

The compact design makes it possible to integrate the HD 450 Basic PRO into the hygiene circuit in any medical office and is ideally suited for the mechanical reprocessing of medical instruments and accessories.

Detailed product information

Features

Compact and space-saving design - can be used as table-top or built-in unit

The HD 450 Basic PRO thermal disinfector is the ideal device for practices with three to four treatment rooms. Around 300 surgical instruments weighing up to six kilograms can be reprocessed during each cleaning and disinfection process.

The HD 450 Basic PRO can be installed as a table-top unit on a worktop or integrated into your sterilization line as a substructure unit.

Installation requirements

All you need to operate the HD 450 Basic PRO thermal disinfector is the following:

  • Power supply 220...240V; 50/60 Hz; 16A; 2,4KW
  • Cold water connection 3/4 inch
  • Waste water connection DN19

The All-in-One System - Oxides ThermoTab

Only one ThermoTab is required per cleaning and disinfection run, no further cleaning additives have to be added. The all-in-one system combines detergent, rinse aid, salt substitute, and a special enzyme mixture as a catalyst strengthens with the cleaning effect when removing blood, protein and similar substances.

Due to the constant dosage you create a valid, standardized cleaning process in your medical office.

A dosing unit for liquid detergent is not necessary, neutralizer and rinse aid are no longer required - salt only needs to be added from a water hardness of 15° dH.

Operation via IC Touch Control

The HD 450 Basic PRO guarantees you a unique ease of use thanks to its integrated IC Touch Control System. Each individual process step can be followed exactly on the IC Touch Display and thus offers optimum control.

Via our external control unit, control is also possible via a wall or floor display - the ergonomically perfect solution for RDGs integrated into the sterilization line at the bottom, for example.

Reliable documentation and monitoring of all process parameters

The HD 450 Basic PRO thermal disinfector provides reliable documentation of all process parameters using state-of-the-art technology and sensors. These process parameters are stored as a protocol in the RDG - storage capacity: around 3000 batch reports. Within the permanent process documentation, extensive parameter evaluation takes place, which offers perfect security for process traceability in target and actual values. This includes the A0 value, tab monitoring, conductivity and spray arm monitoring as well as temperature curves. The HD 450 Basic PRO is equipped as standard with a network interface and USB socket for reading out the process documentation. The protocols are read out via the documentation software supplied free of charge, either conveniently via the medical office network, PC or via USB stick. You can continue to use your existing medical office computer and digitally archive the reports.

IC ion exchange cartridge for valid water quality

Fully demineralised water ensures the maximum service life of your equipment and instruments in the long term.

The IC Touch Control Display of your IC Medical thermal disinfector informs you immediately when the performance of your VE cartridge is exhausted. This information can also be found in your batch record.

Service

IC Medical also supports you after the purchase. Whether it is planned maintenance or repairs - the service is an important part of IC Medical's sustainable customer orientation.

With our factory technicians and service partners we guarantee a Germany-wide service network. OE quality spare parts are always in stock at IC Medical. Rely on a competent and customer-oriented team.

Because we know: The purchase of a device is only a small part of a successful and satisfying business relationship.

Photos

Videos

HD 450 Basic PRO and HD 450 Injection PRO
HD 450 Basic PRO and HD 450 Injection PRO

Specifications

 HD 450 Basic PRO
Type name HD 450 Basic PRO
Articel number 105 000
Unit dimensions (HxWxD) 45 x 55,5 x 50 cm
Throat (T) 37 cm

Washing chamber (HxWxD)

H = maximum loading height

T = maximum loading depth

33,5 x 49,5 x 45 cm
Weight (empty) 18 kg
Soil pollution ca. 1000 N/m²
Volume of the washing chamber 74 liter
Electrical connection 220...240 V, 50/60 Hz, 16 A, 2,4 kW
Max. sound power (cleaning) 58 dBA
Waste heat 0,55 kW/h (2,7 MJ/h)
Ambient temperature 15 - 35°C
Relative humidity 30 - 60%
Max. installation altitude 2000 m
Installation category 2
Air pressure 75 kPa - 106 kPa
Cold water / demineralized water connection 3/4"
Waster water connection DN19
Quality of the Water

at least drinking water quality according to the Drinking Water Ordinance (DrinkW2001)

or compliance with local regulations

Minimum flow pressure 150 kPa (1,5 bar)
Recommended flow pressure  250 kPa (2,5 bar)
Maximum flow pressure 1000 kPa (10 bar)
Minimum flushing pressure 140 mbar
Max. waste water temperature 93°C
Waste water quantity per hour ca. 20l (at smaller intervals)
Drain pump capacity max. 30 l/min. (Volume in waste water hose)
Length of inlet and outlet hoses Inlethose 1,50 m / Outlethose 2,30 m
Length of the mains cable 2 m
Internal memory up to 3000 Zyklen
Interfaces USB, network (RJ45)
Degree of pollution Category 2
Protection class (to IEC 60529) IP20
CE label 0297
Standard conformity DIN EN ISO 15883-1/2, EN 61010-2-040

Safety data sheets

  •  EC-Material safety data sheet IRA-Salt ([pdf], 908,12 KB)
    You need the material safety data sheet of the IRA-Salt for your documents, please keep them carefully.
  •  EC-Material safety data sheet IRA-Klar ([pdf], 355,42 KB)
    You need the material safety data sheet of IRA-Klar for your documents, please keep them carefully.
  •  EC-Material safety data sheet Oxides Thermo Tabs ([pdf], 457,79 KB)
    You need the material safety data sheet of the Oxides Thermo Tabs for your documents, please keep them carefully.
  •  EC-Material Safety Data Sheet Service Tabs ([pdf], 357,62 KB)
    You need the material safety data sheet of the service tabs for your documents, please keep them carefully.
  •  EC-Material safety data sheet Medical white oil ([pdf], 326,11 KB)
    You need the safety material data sheet of the medical white oil for your documents, please keep them carefully.

Brochures

  •  Broschüre IC Ionentauscher Kartusche ([pdf], 805,61 KB)
  •  Broschüre Thermodesinfektor HD 450 Basic / Injection PRO ([pdf], 4,64 MB)
  •  Brochure HD 450 Basic / Injection PRO ([PDF], 4,67 MB)

Installation and instructions

  •  Instruction protocol thermal desinfector HD 450 Basic / Injection PRO ([pdf], 31,78 KB)
    You need the instruction protocol of the thermal desinfector PRO for your documents, please keep them carefully.
  •  Installation protocol thermal desinfector HD 450 Basic / Injection PRO ([pdf], 164,15 KB)
    You need the installation instructions of the thermal desinfector PRO for your documents, please keep them carefully.
  •  Installation instructions thermal desinfector HD 450 Basic / Injection PRO ([pdf], 183,15 KB)
  •  Installation requirements thermal desinfector HD 450 Basic / Injection PRO ([pdf], 839,66 KB)
    Please check the installation requirements for your thermal disinfector HD 450 PRO carefully and return this document to IC Medical with your signed order.

Testimonials

  •  Experience report Dr. med. dent. Firla - Dentistry ([pdf], 313,63 KB)
  •  Experience report Dr. med. dent. Zipprich - Dentistry ([pdf], 152 KB)
  •  Experience report Dr. med. Jung - Dermatology ([pdf], 206,18 KB)

User manuals

  •  Benutzerhandbuch Thermodesinfektor HD 450 Basic / Injection PRO V6.2 ([pdf], 2,85 MB)
  •  User manuel thermal desinfector HD 450 Basic / Injection PRO ([pdf], 1,74 MB)

Support

  •  Order form Annual maintenance Thermal disinfector HD 450 ([pdf], 171,75 KB)

Validations

  •  Broschüre Validierung ([pdf], 386,82 KB)
  •  Order Form Validation and Maintenance ([pdf], 1,51 MB)

Product advice / Price inquiry

How can we help you?

My contact details

Upcoming events

Logo
May 9th till 11th 2019
44th Annual Conference of Dentists from South Baden
Logo
October 11 till 12th 2019
FACHDENTAL exhibition Southwest / id information days dental Stuttgart
Logo
October 18th till 19th 2019
id information days dental Munich

Trade show and event overview